How Can We Help?

Table of Contents
< All Topics
Print

Features

Provides extra security by giving the impression of an occupied house

This driver records your lighting changes throughout the day and stores them for future playback. This way the lighting can be set to an away or Vacation mode so that the apperance of an occupied house can be given.

Records Lighting Usage for recorded playback

Configuration settings allow you to exclude rooms from the playback to reduce energy consumption.

Provides Logic control for actions and events

The driver allows for controls via Actions and provides passthru events for enabling and disabling other logic based on a Home or Away Status.

Provides Daily Random events for Audio Visual Media Scenes

In addition to Lighting events to create a real impressions of an occupied house two sets of paired events are provided to drive media Scenes. These are randomised automatically on a daily basis to stop them from looking automated. One set of events is provided for Morning and one for evening to recreat the impression of normal house usage. These can trigger audio visual equipment or media scenes to be recalled.

Scope

The intended purpose of the solution is to give  impression of an occupied house through recording and playing back lighting scenes.

Depending on how long you recorded for the software may have copied data from one day to another. Which means repeating data but not day specific.
The software relies on making database writes to a database hundreds of times a day and reading from the crestron home api hundreds of times a day.
If there are errors in either of these we handle them but don’t reproduce the data as it is timely. Our target data is 80% minimum which achieves the solutions aim of giving the impression of occupation.
Lastly there are a number of nuisances within the pyng lighting system around nested scenes and excluded channels that may cause issues.
The above can be problematic if you have chosen to use direct light control rather than scene control as this may cause zones to have no active scenes
So in short we don’t guarantee a 100% accurate record/playback solution although its potentially possible its not the intention of this product.

Setup

Technology

This driver leverages the Crestron Home Web API.

Before loading the driver make a note of your API Authentication Token.

We have a “how to” article and video here

Dynamic Configuration

Other than entering the token above there is no other configuration to do on the driver.

The UI shown is based on the current Crestron Lighting Areas Scenes.

Setup New V4.2.0.0 Onwards

From verson 4.2 we have simplified and automated the connection and you simply load the driver to you system and add your licence key using the setup app, Web App or User Interface.

Mode: At Home

When the driver is in At Home mode the software will record the state of your crestron lighting every 5 minutes. You can see this data building up in the settings section of the driver and verify that everything is working correctly.

The stored data page shows

Total Percentage of Stored States

Daily Percentage of Stored States

The time the last save was done

The Number of states saved today.

The Connection Status of the Pyng Connection.

The driver records lighting in real time so to build up a full picture it records all the time even once it has a full record of data. To enable the driver to be used for “Away Mode” before a full weeks worth of data has been captured we will copy data from a full day to any days that dont have enough data.

Hence the minimum requirement is 80% on one day of the week. Once this has been captured you will be able to enable away mode.

When Away mode is active the System does not record current lighting states and this is indicated on the stored data page.

Mode: Away

When set to Away Mode the driver will recall the pre-recorded lighting scenes in all rooms which have not been disabled in settings. The driver will recall lighting scenes every five minutes to make the lighting changes as per the states recorded during the previous 7 days.

Exclude Rooms

In settings you can disable certain rooms. When a room is disabled its lighting wont be changed based on the recorded states.

Actions and Events

Actions (Connect other events and keypad presses in your system to control the driver)

ActionDescriptionParameterValueNotes
SetHomeSets the Current Mode to Home
SetAwaySets the Current Mode to Away ( if sufficient state data is recorded)
Toggle Home AwayToggles the current Home/Away State
AwayPassthruTriggers the Button Passthru Away State event when the current mode is Away
HomePassthruTriggers the Button Passthru Away State event when the current mode is Home

Events (Connect other functionality based on an event in the driver)

EventDescriptionNotes
AV Event AM StartThis event fires at a randomised daily time in the morning.These Events are randomised daily and are intended to control AV Scenes to give the impression of an occupied house.
AV Event AM EndThis event fires at a randomised daily time in the morning after the Start Event.These Events are randomised daily and are intended to control AV Scenes to give the impression of an occupied house.
AV Event PM StartThis event fires at a randomised daily time in the afternoonThese Events are randomised daily and are intended to control AV Scenes to give the impression of an occupied house.
AV Event PM EndThis event fires at a randomised daily time in the afternoon after the Start Event.These Events are randomised daily and are intended to control AV Scenes to give the impression of an occupied house.
Home Pass EventThis event fires whenever the Home Passthru action is triggered and the current mode is Home
Away Pass EventThis event fires whenever the Away Passthru action is triggered and the current mode is Away

Select currency
USD United States (US) dollar