How Can We Help?

Table of Contents
< All Topics
Print

DRAFT

“Simple & Easy Installation
Integrated Security – Access Control”

SIMPL Windows Modules

Our Inception modules for Crestron SIMPL windows consists of a central hardware connection module and multiple companion modules for control of areas, doors, inputs and outputs.

The Inception modules for Crestron SIMPL windows are compatible with 4 series processors and VC4.

Hardware Configuration

The central hardware connection module connects to the Inception as a standard user. The best practice is to create a user just for the Crestron system and set the web page profile to “REST Web Api User”. The user must be added with the relevant permissions for the Areas, Doors, Inputs and Outputs that you wish to control and monitor.

The area module arming and Disarming actions can be performed with or without a user pin to be entered.

  • Arming and Disarming with a pin – the action will be performed as the user associated with that pin, their area permissions checked and their name logged in the review event history. Each users area permissions should be enabled or disabled as necessary for the user requirements.
  • Arming and Disarming without a pin – the action will be performed as the REST Web Api User, using the REST Web Api User area permissions and name in the review event history. The REST Web Api User area permissions should be enabled or disabled as necessary the arming and disarming without pin requirements.

Here is an Example of a User Setup to Access Alarms , Doors and Inputs.

In addition any Security Areas you wish to control should have the Multi-Mode Arming Setting Checked as show in the Screenshot here

Where to download the module and purchase a licence

#container downloads, demo licences, purchased licences

Using the example project

We advise that you first run the supplied example project on your processor to understand how each of the InnerRange Inception modules work and confirm your InnerRange Inception is setup correctly

#container or link about using the example project

Adding modules to your system

Select currency
GBP Pound sterling