From the home page of the Crestron Home Interface the user clicks on the NUKI lock tile.

The user is presented with the current status of the lock (and door sensor if fitted) as well as options to Lock or Unlock the NUKI lock

Here is a screenshot of the application showing a correctly setup system including a Bridge and a single Lock.

The green indicators show a correct Server, bridge and Lock connection which are required for discovery and pairing.

NB: Once paired a cloud server connection is not required for the Crestron Home integration.

In the Nuki Bridge Settings the two developer options must be enabled:

• API Quick Discovery – ( used for automatic discovery)
• HttpAPI – (used for device control)

Once you have added the Main Intercom Driver to a room you will see the controller UI tile in the room that you added the driver:

The Main page will show a button prompting you to change details of your Nuki Bridge.

Click the button to go straight to the device settings page.

The Driver will automatically attempt to discover any Nuki Bridges on the same subnet as your device.

Click on a discovered Bridge to connect to that bridge or Click on the Connect Manually button to add a Bridge using a known IP Addess.

Top Tips:

We recommend setting up a MAC address reservation for your Nuki Bridge for the best stystem stability.

A Nuki Cloud server connection is required for the discovery to work and so we also give you the option to connect manually by adding the ip address of your bridge.

(this can be found in the Nuki App using Manage Bridges)

If you have already paired with the bridge the pairing information and API key will be show if its the first time then press Pair with Bridge to start the pairing process.

Once you have pressed the Pair with Bridge button you can complete the pairing (within 30 seconds) by pressing the button on the Nuki Bridge.

Once pairing is complete the status on the page will show the API key and a Paired Status for your System and the Online Status will show ONLINE.