LCD IR App for Crestron Home CableBox Help File

Manufacturer: LCD IR App

Model: Global Cache CableBox

Device Type:

CableBox

GENERAL INFORMATION

CRESTRON HOME DRIVER NAME: “LCD.CHomeDriver.GlobalCacheCableBox”

CATEGORY: LCD

SUMMARY: This driver will allow connection to a Global Cache IP2IR iTach for control of an IR device

VERSION: 1.0.0

v1.0.0: Initial Release

GENERAL NOTES:

This driver is setup using the LCD Global Cache Configurator where you can: 
- Configure the connection details of the Global Cache 
- Browse and test the IR code-sets available from the Global Cache online database
- Upload a custom code-set specific for your device or requirement
- Modify the IR codes to send for each of the device commands
- Add or update the Licence Key used for the driver 

This driver is compatible with 4 series Crestron Home projects (including PC4-R)

VENDOR SETUP:

1. Install the Driver on your Crestron Home System by first finding it in the Drivers Section of the Crestron Home Setup App  
   You will find the Display Driver in: Drivers > AV Receiver > LCD IR App > Global Cache Display

2. Open the link provided in the driver user attribute "LCD IR APP URL" using a web browser on the same network

3. Complete the Global Cache connection details and IR codeset command setup in the LCD Global Cache Configurator  

note:
The LCD Clobal Cache Configurator discovers Global Cache IP2IR iTach devices installed on the same 
local area network as the Crestron Processor.
If discovery is not possible then the IP Address and Port of the IP2IR can be entered manually.

DRIVER INFORMATION

TESTING:

OPS USED FOR TESTING:

CRESTRON HOME SETUP TOOL USED FOR TESTING:

Setup Utility Version: 1.0.32