Our Inception modules for Crestron SIMPL windows consists of a central hardware connection module and multiple companion modules for control of areas, doors, inputs and outputs.
The Inception modules for Crestron SIMPL windows are compatible with 4 series processors and VC4.
Hardware Configuration
The central hardware connection module connects to the Inception as a standard user. The best practice is to create a user just for the Crestron system and set the web page profile to “REST Web Api User”. The user must be added with the relevant permissions for the Areas, Doors, Inputs and Outputs that you wish to control and monitor.
The area module arming and Disarming actions can be performed with or without a user pin to be entered.
Arming and Disarming with a pin – the action will be performed as the user associated with that pin, their area permissions checked and their name logged in the review event history. Each users area permissions should be enabled or disabled as necessary for the user requirements.
Arming and Disarming without a pin – the action will be performed as the REST Web Api User, using the REST Web Api User area permissions and name in the review event history. The REST Web Api User area permissions should be enabled or disabled as necessary the arming and disarming without pin requirements.
Here is an Example of a User Setup to Access Alarms , Doors and Inputs.
In addition any Security Areas you wish to control should have the Multi-Mode Arming Setting Checked as show in the Screenshot here
Where to download the module and purchase a licence
We advise that you first run the supplied example project on your processor to understand how each of the InnerRange Inception modules work and confirm your InnerRange Inception is setup correctly
#container or link about using the example project
Customise and enable tile Icon (Update from multiple Buttons)
Extensive flexibility of usage through events and actions.
Show and Hide Buttons based on other button states.
Passthru Logic Functions for each button state.
Build your own UI with custom Buttons with feedback.
Like Quick Actions but so much more!
Usage
Currently we offer two different dynamic button drivers , a single button and a customisable user interface which offers up to ten buttons on a single user interface page, both also allow the use of the room tile aswell.
These two drivers allow for a multitude of uses to control and monitor the state of devices, functions and controls. The possibilities are really endless.
We have documented many examples in our library of use case examples here
Home View
From a user perspective the user interface provides a tile element on the room page and/or home page and a button or buttons in the main user interface page.
These buttons display an on or off state which can be changed by pressing the button (toggle) changed by pressing the room tile. Or changed using the Actions and Events System in Crestron Home.
In addition to the above which is all configurable in settings, the driver exposes a number of settings, actions and events making the simple button a hugely powerful control element.
Each State allows customisation of the text and icon , In addition the room tile icon and text can be set via actions allowing effecively many states including error states to be displayed.
The buttons can be used just as a status indicator with no user interaction via the user interface. Setting the state using Actions allows the state of a device or system to be displayed to the user.
The buttons state can also be used as a in simple logic allowing you only to allow or to action certain events in your system if the button is in a certain state.
Room View
Setup
Using the Setup pages of the driver you can hide and show buttons and setup the on and off text and icons for each of the buttons you require. NB: Dynamic Button single only has one button although you can hide it if you want!
The setup of the buttons is stored persistantly meaning once you setup a driver the settings will persist a reboot of the driver. The available settings are detailed in the table below and can be found in the setting page of the driver. Acces the setup pages as descibed here
Settings Page
The Settings page shows all current buttons.
Unique Index and Name
The Unique Index is shown for each button. This is used when setting up your actions and events. The name is just added for your reference.
The Current Text and Image are shown for each state.
Edit
The Edit Button (Sliders) allows you to change the Name and for each state the icon and text. In addition all of the per button settings can be found in the button edit page.
The Per Button Settings are detailed in the table in the related section further down this page.
Edit Button Page
The Icon select page is shown when you click to change a state Icon or the tile icon.
Simply click on the icon you wish to use and the Icon will update.
NB: Icons only update on the User facing button once a state change has occured.
Events and Actions
Setting Name
Description
Type
Notes
Name
Name of button only used for your own reference.
Text
Off State Text
The text displayed on the button when in the Off state
Text
Off State Icon
The Icon displayes on the button when in the Off state
Icon Selector
On State Text
The text displayed on the button when in the On state
Text
On State Icon
The Icon displayes on the button when in the On state
Icon Selector
Reboot Forces Button State
Force the Button state Off/On instead of using the memorized state (State at shutdown)
Checkbox
Reboot Forces Button Off State
Force the Button state Off after a reboot
Checkbox
Only visible if Reboot forces Button state
Reboot Forces Button On State
Force the Button state On after a reboot
Checkbox
Only visible if Reboot forces Button state
Reboot Fires Button State Event
Fire the Button State Event after a reboot
Checkbox
Button Is Visible
Button is shown on the User Interface
Checkbox
Ignore Button Presses
Button Presses on the user interface do not toggle the state of the button. Select if only using as a status button.
Checkbox
Show User Warning
Shows warning on the user interface to warn user that button is ignored.
Checkbox
Only visible if button ignored
Button State Changes Room Tile
Any state change of the button will cause the room tile to display the same icon and text of the button in the new state.
Checkbox
Actions
Action
Description
Parameter
Value
Parameter 2
Value
Passthru Logic
Triggers the Button Passthru Off State event or Button Passthru On State event depending on the buttons state
Button
1-10 *
State to Passthru
Test Both States
Triggers the Button Passthru Off State event only if the button is in an off state
Button
1-10 *
State to Passthru
Only Test Off State
Triggers the Button Passthru On State event only if the button is in an on state
Button
1-10 *
State to Passthru
Only Test On State
Set Button State and Event
Triggers the Button State Set Off event and displays the button in an off state
Button
1-10 *
State to set
Set to Off State
Triggers the Button State Set On event and displays the button in an on state
Button
1-10 *
State to set
Set to On State
Toggles between the Button State Set Off event and Button State Set On event as well as update the button display state
Button
1-10 *
State to set
Toggle the State
Set Button State
Changes the button state to off without triggering the Button State Set Off event
Button
1-10 *
State to display
Display as Off State
Changes the button state to on without triggering the Button State Set On event
Button
1-10 *
State to display
Display as On State
Set Button Visibity
Shows the button on the user interface
Button
1-10 *
Visibilty to set
Show the button
Hides the button on the user interface
Button
1-10 *
Visibilty to set
Hide the button
SetTileText
This Event Sets the tile text from a list of available icons. This will be overidden by an icon from a button if enabled.
Text
Text to Set
Set Tile Icon
This Event Sets the tile icon from a list of available icons. This will be overidden by an icon from a button if enabled.
Icon
List of Images
Events
Event
Description
Notes
Button State was Set Off
This event fires whenever the button is set to the off state from the user interface or the Button Set To State action
Button State was Set On
This event fires whenever the button is set to the on state from the user interface or the Button Set To State action
Button Pressed
This event fires whenever the button is pressed on the user interface even if the Ignore Button Presses setting is enabled
This event always fires even is the Ignore Button Presses is setting is enabled
Button Passthru Off Logic
This event fires whenever the Button Passthru action is triggered and the button is in an off state
Button Passthru On Logic
This event fires whenever the Button Passthru action is triggered and the button is in an on state
Room Tile Pressed
This event fires whenever the room tile is pressed on the user interface
This event always fires even is the Ignore Button Presses is setting is enabled
Driver Loaded
This event fires whenever the driver is loaded, like after a reboot or if the driver name is changed
Extensive flexibility of usage through events and actions.
Passthru Logic Functions for each button state
Build your own custom Button with feedback.
Like Quick Actions but so much more!
Usage
Currently we offer two different dynamic button drivers , a single button and a customisable user interface which offers up to ten buttons on a single user interface page, both also allow the use of the room tile aswell.
These two drivers allow for a multitude of uses to control and monitor the state of devices, functions and controls. The possibilities are really endless.
We have documented many examples in our library of use case examples here
Home View
From a user perspective the user interface provides a tile element on the room page and/or home page and a button or buttons in the main user interface page.
These buttons display an on or off state which can be changed by pressing the button (toggle) changed by pressing the room tile. Or changed using the Actions and Events System in Crestron Home.
In addition to the above which is all configurable in settings, the driver exposes a number of settings, actions and events making the simple button a hugely powerful control element.
Each State allows customisation of the text and icon , In addition the room tile icon and text can be set via actions allowing effecively many states including error states to be displayed.
The buttons can be used just as a status indicator with no user interaction via the user interface. Setting the state using Actions allows the state of a device or system to be displayed to the user.
The buttons state can also be used as a in simple logic allowing you only to allow or to action certain events in your system if the button is in a certain state.
Room View
Setup
Using the Setup pages of the driver you can hide and show buttons and setup the on and off text and icons for each of the buttons you require. NB: Dynamic Button single only has one button although you can hide it if you want!
The setup of the buttons is stored persistantly meaning once you setup a driver the settings will persist a reboot of the driver. The available settings are detailed in the table below and can be found in the setting page of the driver. Acces the setup pages as descibed here
Settings Page
The Settings page shows all current buttons.
Unique Index and Name
The Unique Index is shown for each button. This is used when setting up your actions and events. The name is just added for your reference.
The Current Text and Image are shown for each state.
Edit
The Edit Button (Sliders) allows you to change the Name and for each state the icon and text. In addition all of the per button settings can be found in the button edit page.
The Per Button Settings are detailed in the table in the related section further down this page.
Edit Button Page
The Icon select page is shown when you click to change a state Icon or the tile icon.
Simply click on the icon you wish to use and the Icon will update.
NB: Icons only update on the User facing button once a state change has occured.
Events and Actions
Setting Name
Description
Type
Notes
Name
Name of button only used for your own reference.
Text
Off State Text
The text displayed on the button when in the Off state
Text
Off State Icon
The Icon displayes on the button when in the Off state
Icon Selector
On State Text
The text displayed on the button when in the On state
Text
On State Icon
The Icon displayes on the button when in the On state
Icon Selector
Reboot Forces Button State
Force the Button state Off/On instead of using the memorized state (State at shutdown)
Checkbox
Reboot Forces Button Off State
Force the Button state Off after a reboot
Checkbox
Only visible if Reboot forces Button state
Reboot Forces Button On State
Force the Button state On after a reboot
Checkbox
Only visible if Reboot forces Button state
Reboot Fires Button State Event
Fire the Button State Event after a reboot
Checkbox
Button Is Visible
Button is shown on the User Interface
Checkbox
Ignore Button Presses
Button Presses on the user interface do not toggle the state of the button. Select if only using as a status button.
Checkbox
Show User Warning
Shows warning on the user interface to warn user that button is ignored.
Checkbox
Only visible if button ignored
Button State Changes Room Tile
Any state change of the button will cause the room tile to display the same icon and text of the button in the new state.
Checkbox
Actions
Action
Description
Parameter
Value
Parameter 2
Value
Passthru Logic
Triggers the Button Passthru Off State event or Button Passthru On State event depending on the buttons state
Button
1-10 *
State to Passthru
Test Both States
Triggers the Button Passthru Off State event only if the button is in an off state
Button
1-10 *
State to Passthru
Only Test Off State
Triggers the Button Passthru On State event only if the button is in an on state
Button
1-10 *
State to Passthru
Only Test On State
Set Button State and Event
Triggers the Button State Set Off event and displays the button in an off state
Button
1-10 *
State to set
Set to Off State
Triggers the Button State Set On event and displays the button in an on state
Button
1-10 *
State to set
Set to On State
Toggles between the Button State Set Off event and Button State Set On event as well as update the button display state
Button
1-10 *
State to set
Toggle the State
Set Button State
Changes the button state to off without triggering the Button State Set Off event
Button
1-10 *
State to display
Display as Off State
Changes the button state to on without triggering the Button State Set On event
Button
1-10 *
State to display
Display as On State
Set Button Visibity
Shows the button on the user interface
Button
1-10 *
Visibilty to set
Show the button
Hides the button on the user interface
Button
1-10 *
Visibilty to set
Hide the button
SetTileText
This Event Sets the tile text from a list of available icons. This will be overidden by an icon from a button if enabled.
Text
Text to Set
Set Tile Icon
This Event Sets the tile icon from a list of available icons. This will be overidden by an icon from a button if enabled.
Icon
List of Images
Events
Event
Description
Notes
Button State was Set Off
This event fires whenever the button is set to the off state from the user interface or the Button Set To State action
Button State was Set On
This event fires whenever the button is set to the on state from the user interface or the Button Set To State action
Button Pressed
This event fires whenever the button is pressed on the user interface even if the Ignore Button Presses setting is enabled
This event always fires even is the Ignore Button Presses is setting is enabled
Button Passthru Off Logic
This event fires whenever the Button Passthru action is triggered and the button is in an off state
Button Passthru On Logic
This event fires whenever the Button Passthru action is triggered and the button is in an on state
Room Tile Pressed
This event fires whenever the room tile is pressed on the user interface
This event always fires even is the Ignore Button Presses is setting is enabled
Driver Loaded
This event fires whenever the driver is loaded, like after a reboot or if the driver name is changed
Control 3rd party lighting with a common simple interface, One controller per room allowing scene control.
The Lighting tile shows a simple Light icon and provides access to the drivers main control page.
The main page allows you to control your lighting using up to eight preset Buttons.
The labels of these scenes can be setup in the settings page of the driver by your installer.
First Installation
On first use the user interface will display a shortcut button taking you to the settings page.
From here the first thing to do is to setup your device entering the ip address and connection information for the device.
Setup Dynalite
Once connection to the device has been verified the setup is very quick and simple.
Select the Area you want to control.
Name the Presets with user firendly names.
Check the box to make the preset visible on the main page or Uncheck to hide this preset from the user.
Actions and Events
This driver supports actions and events allowing you to connect up to other drivers and system controls to provide a more integrated system for your users.
Actions
Action
Description
Parameter
Value
Value
Preset Recall
Triggers the Button Passthru Off State event or Button Passthru On State event depending on the buttons state
Button
1-8
Attempts to recall the Preset on the lighting system. If this suceeds and a confirm is recieved the button feedback on the user interface is set and the preset event Set by action will fire.
Events
Event
Description
Notes
Preset Pressed
This event fires when preset X button is pressed.*
x is the index of the preset from 1 - 8
Preset Set by Action
This event fires when the preset is set by the Preset Recall Action *
Events only fire if the Lighting System Responds with an success response.
Preset Set by Action Or Press
This event fires (once) when the preset is set by the Preset Recall Action or by its button press.*
*This fires even if the preset was already selected.
Room Tile Pressed
This event fires whenever the room tile is pressed on the user interface
Any Preset Button Pressed
This event fires when any preset button is pressed
Control 3rd party lighting with a common simple interface, One controller per room allowing scene control.
The Lighting tile shows a simple Light icon and provides access to the drivers main control page.
The main page allows you to control your lighting using up to eight preset Buttons.
The labels of these scenes can be setup in the settings page of the driver by your installer.
First Installation
On first use the user interface will display a shortcut button taking you to the settings page.
From here the first thing to do is to setup your device entering the ip address and connection information for the device.
Setting Up Mode Scenes
Once the device connection has been verified you can select the area you wish to focus on.
The Scene information is gathered from the mode lighting system and the list of available scenes show for each preset is filtered based on the selected area.
If no Area is selected then all scenes will be shown on the Change Scene page.
NB: If your scene or area information changes then to refresh the information simply go to Device Connection and re-test the connection without changing any information. This rec-connect will updated the area and scene name information.
A fade time in seconds can be set as a global setting affecting all presets.
Per preset that you wish to use you need to:
Select a Scene – Change Scene from a list of Scenes.
Show the Preset – this shows the preset on the user main page.
Either
Set a Custom Scene name
Use the Mode Scene Name
Mode Hardware Setup
Our integration with mode lighting uses both Http and TCP communications to allow us to control and gather feedback from a Mode lighting Network Processor Unit NPU. In this way we support the full range of Mode lighting controllers and load types.
Currently we require a minimum firmware / software version of 2.4.1.44. To get the latest firmware visit mode lighting’s website
Best Practice
Setup a Static IP Address
Find the IP Address using the display on the fron of the NPU
Actions and Events
This driver supports actions and events allowing you to connect up to other drivers and system controls to provide a more integrated system for your users.
Actions
Action
Description
Parameter
Value
Value
Preset Recall
Triggers the Button Passthru Off State event or Button Passthru On State event depending on the buttons state
Button
1-8
Attempts to recall the Preset on the lighting system. If this suceeds and a confirm is recieved the button feedback on the user interface is set and the preset event Set by action will fire.
Events
Event
Description
Notes
Preset Pressed
This event fires when preset X button is pressed.*
x is the index of the preset from 1 - 8
Preset Set by Action
This event fires when the preset is set by the Preset Recall Action *
Events only fire if the Lighting System Responds with an success response.
Preset Set by Action Or Press
This event fires (once) when the preset is set by the Preset Recall Action or by its button press.*
*This fires even if the preset was already selected.
Room Tile Pressed
This event fires whenever the room tile is pressed on the user interface
Any Preset Button Pressed
This event fires when any preset button is pressed
Crestron Home owners can now modify there own schedules!
Each sprinkler scheduler driver includes 4 user editable schedules for up to 10 dealer defined events
Usage
Once the quick setup is completed, users can modify schedules, override schedules and view the event history all with just a few clicks!
All of our Scheduler products have the same base functionality which is described below.
From the room page or home page of any Crestron Home User Interface the user can see the latest event status of the scheduler.
Click the navigation button to access more schedule functions.
The user is presented with manual override buttons as well as the current schedule information.
Simply click any of the override buttons to action that event immediately.
To edit any of the schedules simply press the Edit button associated with the schedule.
For each schedule you can:
Change the schedule name
Enable or disable the schedule
Change which days the schedule should run
Change the time the schedule should run
Change the event the schedule should run
System Setup
Add the Heating Scheduler
You can find driver in the Drivers section of the Crestron Home Setup App under:
Drivers -> Scheduler -> LCD Scheduler
Add the scheduler to your desired room
Enter the License Key
The Heating Scheduler license is a single licence, you can find more information regarding our licence types here at our Licensing Info Page
After you install the driver, you can add your licence details in any of the following places:
The driver installation settings of the Crestron Home Setup App
The installed driver page of the LCD Web App More Info Here
The drivers license settings on any Crestron Home User Interface
Access the driver settings
You can find the heating scheduler settings in the Crestron Home User Interface
Navigate to the room where you installed the driver
Click on the driver navigation button
Click on the Driver Settings button at the bottom of the page
Driver Settings
Heating Scheduler Customisable Events
The Heating Scheduler has up to 10 customisable events that can be triggered by any of the schedules or by using the manual override buttons.
Each of the customised events that you setup will also need to be pre-programmed in the Actions and Event section of the Crestron Home setup app.
An example of some typical events you might set up for the end user would be:
Simple on/off controls like “Heating On” and “Heating Off”
Direct temperature controls like “Set Heating to 22 C”, “Set Heating to 23 C” …
Device specific controls like “Quick Heat” or “Heating Setback”
The events you choose to setup will mostly depend on the device you are controlling and its actions available in Actions and Events.
Customising the Heating Scheduler Events
You customise the heating scheduler events in the drivers settings page on any Crestron Home UI
once you are on the driver settings page, press the “Event Setup” button at the top of the page and then select which event you would like to customise
Customisable options for each event include:
The event name which will be displayed:
to the dealer in actions and events
to the end user on the main schedule pages
to the end user on the UI tile after the event is triggered
The event icon which will be displayed:
to the end user on the main schedule pages
to the end user on the UI tile after the event is triggered
The option to show or hide this event on the main schedule pages
Additional Schedule Settings
Schedule Page Heading
Set the heading that is displayed to end user on main scheduler pages
Schedule Main Page Options:
User Can Edit Schedules Option – turn off to block the end user from modifying any of the schedules
User Can Enable/Disable Events – turn off to block the end user from changing the global event enable/disable function
Schedule Edit Page Options:
User Can Edit Name – Turn off to block the end user from changing the schedule names
User Can Edit Days – Turn off to block the end user from changing which days the schedules will run
User Can Edit Time – Turn off to block the end user from changing what time the schedules will run
User Can Edit Event – Turn off to block the end user from changing which event the schedules will trigger
Settings , Actions and Events
Setting Name
Description
Type
Notes
Event Setup
Navigation to event Setup
Event List
Allows you to chage names of Events and set an icon.
User can Edit Schedules
If checked the user can edit the schedule.
Checkbox
User can Enable/Disable Events
If checked the user can enable and disable the scheduled events from firing.
Checkbox
NB: This does not disable the schedule just stops the events from firing.
User can edit Name
If Checked the user is allowed to edit the schedule name.
Checkbox
User can Edit Days
If Checked the user is allowed to edit on which days the schedule should apply.
Checkbox
User can edit Time
If Checked the user is allowed to edit the time that the schedule should occur.
Checkbox
User can edit Event
If Checked the user is allowed to change which event should be fired when the schedule occurs.
Checkbox
Action
Description
Parameter
Value
Notes
Enable All Events
Turns all events on. Schedules will occure as per the settings of the scheduler and log entries will appear.
Disable All Events
Turns all events off. No log entries will be made and no events fired.
Enable Schedule
Enables the Selected Schedule
Schedule Number
1 - Max number of schedules (dependant on driver product)
Manual Recall Event
Triggers the Schedule and adds an entry to the log and fires the associated event if events are enabled.
Schedule Number
1 - Max number of schedules (dependant on driver product)
Event
Description
Notes
EVENT [X]
This event fires whenever the button is set to the off state from the user interface or the Button Set To State action
The name of this event is updated dynamically when set in the user interface. X is the number of the event from 1 - 10
Room Tile Pressed
This event fires whenever the room tile is pressed on the user interface
This event always fires even is the Ignore Button Presses is setting is enabled
Crestron Home owners can now modify there own schedules!
Each lighting scheduler driver includes 4 user editable schedules for up to 10 dealer defined events
Each heating scheduler driver includes 4 user editable schedules for up to 10 dealer defined events
Usage
Once the quick setup is completed, users can modify schedules, override schedules and view the event history all with just a few clicks!
All of our Scheduler products have the same base functionality which is described below.
From the room page or home page of any Crestron Home User Interface the user can see the latest event status of the scheduler.
Click the navigation button to access more schedule functions.
The user is presented with manual override buttons as well as the current schedule information.
Simply click any of the override buttons to action that event immediately.
To edit any of the schedules simply press the Edit button associated with the schedule.
For each schedule you can:
Change the schedule name
Enable or disable the schedule
Change which days the schedule should run
Change the time the schedule should run
Change the event the schedule should run
System Setup
Add the Heating Scheduler
You can find driver in the Drivers section of the Crestron Home Setup App under:
Drivers -> Scheduler -> LCD Scheduler
Add the scheduler to your desired room
Enter the License Key
The Heating Scheduler license is a single licence, you can find more information regarding our licence types here at our Licensing Info Page
After you install the driver, you can add your licence details in any of the following places:
The driver installation settings of the Crestron Home Setup App
The installed driver page of the LCD Web App More Info Here
The drivers license settings on any Crestron Home User Interface
Access the driver settings
You can find the heating scheduler settings in the Crestron Home User Interface
Navigate to the room where you installed the driver
Click on the driver navigation button
Click on the Driver Settings button at the bottom of the page
Driver Settings
Heating Scheduler Customisable Events
The Heating Scheduler has up to 10 customisable events that can be triggered by any of the schedules or by using the manual override buttons.
Each of the customised events that you setup will also need to be pre-programmed in the Actions and Event section of the Crestron Home setup app.
An example of some typical events you might set up for the end user would be:
Simple on/off controls like “Heating On” and “Heating Off”
Direct temperature controls like “Set Heating to 22 C”, “Set Heating to 23 C” …
Device specific controls like “Quick Heat” or “Heating Setback”
The events you choose to setup will mostly depend on the device you are controlling and its actions available in Actions and Events.
Customising the Heating Scheduler Events
You customise the heating scheduler events in the drivers settings page on any Crestron Home UI
once you are on the driver settings page, press the “Event Setup” button at the top of the page and then select which event you would like to customise
Customisable options for each event include:
The event name which will be displayed:
to the dealer in actions and events
to the end user on the main schedule pages
to the end user on the UI tile after the event is triggered
The event icon which will be displayed:
to the end user on the main schedule pages
to the end user on the UI tile after the event is triggered
The option to show or hide this event on the main schedule pages
Additional Schedule Settings
Schedule Page Heading
Set the heading that is displayed to end user on main scheduler pages
Schedule Main Page Options:
User Can Edit Schedules Option – turn off to block the end user from modifying any of the schedules
User Can Enable/Disable Events – turn off to block the end user from changing the global event enable/disable function
Schedule Edit Page Options:
User Can Edit Name – Turn off to block the end user from changing the schedule names
User Can Edit Days – Turn off to block the end user from changing which days the schedules will run
User Can Edit Time – Turn off to block the end user from changing what time the schedules will run
User Can Edit Event – Turn off to block the end user from changing which event the schedules will trigger
Settings , Actions and Events
Setting Name
Description
Type
Notes
Event Setup
Navigation to event Setup
Event List
Allows you to chage names of Events and set an icon.
User can Edit Schedules
If checked the user can edit the schedule.
Checkbox
User can Enable/Disable Events
If checked the user can enable and disable the scheduled events from firing.
Checkbox
NB: This does not disable the schedule just stops the events from firing.
User can edit Name
If Checked the user is allowed to edit the schedule name.
Checkbox
User can Edit Days
If Checked the user is allowed to edit on which days the schedule should apply.
Checkbox
User can edit Time
If Checked the user is allowed to edit the time that the schedule should occur.
Checkbox
User can edit Event
If Checked the user is allowed to change which event should be fired when the schedule occurs.
Checkbox
Action
Description
Parameter
Value
Notes
Enable All Events
Turns all events on. Schedules will occure as per the settings of the scheduler and log entries will appear.
Disable All Events
Turns all events off. No log entries will be made and no events fired.
Enable Schedule
Enables the Selected Schedule
Schedule Number
1 - Max number of schedules (dependant on driver product)
Manual Recall Event
Triggers the Schedule and adds an entry to the log and fires the associated event if events are enabled.
Schedule Number
1 - Max number of schedules (dependant on driver product)
Event
Description
Notes
EVENT [X]
This event fires whenever the button is set to the off state from the user interface or the Button Set To State action
The name of this event is updated dynamically when set in the user interface. X is the number of the event from 1 - 10
Room Tile Pressed
This event fires whenever the room tile is pressed on the user interface
This event always fires even is the Ignore Button Presses is setting is enabled
Crestron Home owners can now modify there own schedules!
Each heating scheduler driver includes 4 user editable schedules for up to 10 dealer defined events
Usage
Once the quick setup is completed, users can modify schedules, override schedules and view the event history all with just a few clicks!
All of our Scheduler products have the same base functionality which is described below.
From the room page or home page of any Crestron Home User Interface the user can see the latest event status of the scheduler.
Click the navigation button to access more schedule functions.
The user is presented with manual override buttons as well as the current schedule information.
Simply click any of the override buttons to action that event immediately.
To edit any of the schedules simply press the Edit button associated with the schedule.
For each schedule you can:
Change the schedule name
Enable or disable the schedule
Change which days the schedule should run
Change the time the schedule should run
Change the event the schedule should run
System Setup
Add the Heating Scheduler
You can find driver in the Drivers section of the Crestron Home Setup App under:
Drivers -> Scheduler -> LCD Scheduler
Add the scheduler to your desired room
Enter the License Key
The Heating Scheduler license is a single licence, you can find more information regarding our licence types here at our Licensing Info Page
After you install the driver, you can add your licence details in any of the following places:
The driver installation settings of the Crestron Home Setup App
The installed driver page of the LCD Web App More Info Here
The drivers license settings on any Crestron Home User Interface
Access the driver settings
You can find the heating scheduler settings in the Crestron Home User Interface
Navigate to the room where you installed the driver
Click on the driver navigation button
Click on the Driver Settings button at the bottom of the page
Driver Settings
Heating Scheduler Customisable Events
The Heating Scheduler has up to 10 customisable events that can be triggered by any of the schedules or by using the manual override buttons.
Each of the customised events that you setup will also need to be pre-programmed in the Actions and Event section of the Crestron Home setup app.
An example of some typical events you might set up for the end user would be:
Simple on/off controls like “Heating On” and “Heating Off”
Direct temperature controls like “Set Heating to 22 C”, “Set Heating to 23 C” …
Device specific controls like “Quick Heat” or “Heating Setback”
The events you choose to setup will mostly depend on the device you are controlling and its actions available in Actions and Events.
Customising the Heating Scheduler Events
You customise the heating scheduler events in the drivers settings page on any Crestron Home UI
once you are on the driver settings page, press the “Event Setup” button at the top of the page and then select which event you would like to customise
Customisable options for each event include:
The event name which will be displayed:
to the dealer in actions and events
to the end user on the main schedule pages
to the end user on the UI tile after the event is triggered
The event icon which will be displayed:
to the end user on the main schedule pages
to the end user on the UI tile after the event is triggered
The option to show or hide this event on the main schedule pages
Additional Schedule Settings
Schedule Page Heading
Set the heading that is displayed to end user on main scheduler pages
Schedule Main Page Options:
User Can Edit Schedules Option – turn off to block the end user from modifying any of the schedules
User Can Enable/Disable Events – turn off to block the end user from changing the global event enable/disable function
Schedule Edit Page Options:
User Can Edit Name – Turn off to block the end user from changing the schedule names
User Can Edit Days – Turn off to block the end user from changing which days the schedules will run
User Can Edit Time – Turn off to block the end user from changing what time the schedules will run
User Can Edit Event – Turn off to block the end user from changing which event the schedules will trigger
Settings , Actions and Events
Setting Name
Description
Type
Notes
Event Setup
Navigation to event Setup
Event List
Allows you to chage names of Events and set an icon.
User can Edit Schedules
If checked the user can edit the schedule.
Checkbox
User can Enable/Disable Events
If checked the user can enable and disable the scheduled events from firing.
Checkbox
NB: This does not disable the schedule just stops the events from firing.
User can edit Name
If Checked the user is allowed to edit the schedule name.
Checkbox
User can Edit Days
If Checked the user is allowed to edit on which days the schedule should apply.
Checkbox
User can edit Time
If Checked the user is allowed to edit the time that the schedule should occur.
Checkbox
User can edit Event
If Checked the user is allowed to change which event should be fired when the schedule occurs.
Checkbox
Action
Description
Parameter
Value
Notes
Enable All Events
Turns all events on. Schedules will occure as per the settings of the scheduler and log entries will appear.
Disable All Events
Turns all events off. No log entries will be made and no events fired.
Enable Schedule
Enables the Selected Schedule
Schedule Number
1 - Max number of schedules (dependant on driver product)
Manual Recall Event
Triggers the Schedule and adds an entry to the log and fires the associated event if events are enabled.
Schedule Number
1 - Max number of schedules (dependant on driver product)
Event
Description
Notes
EVENT [X]
This event fires whenever the button is set to the off state from the user interface or the Button Set To State action
The name of this event is updated dynamically when set in the user interface. X is the number of the event from 1 - 10
Room Tile Pressed
This event fires whenever the room tile is pressed on the user interface
This event always fires even is the Ignore Button Presses is setting is enabled
Temperature Thresholds can be connected up to alerts or monitoring tools to ensure users are notified and remedial action can be taken.
The digital inputs might be used to monitor the cellar door which might be crucial in ensuring temperature and humidity of the space.
Device Configuration and Settings
The device supports Poe or Local 5.5VDC power supply. Once on the network the device can be located using a device discovery tool which can be found here (Opens in a new window).
The username and password can be changed from the defaults in the web interface of the device.
The unit defaults to :
User: root
Password: nti
Network Settings can also be configured using the web interface. The device needs to be routable to your crestron home processor. The IP address of the device is required for the driver settings.
The device username,password and IP Address need to be entered into the driver settings page in the Crestron Home setup app.
Control and monitor your NUKI Smart locks from Crestron Home
Connects to the NUKI bridge!
Lock, unlock and view the door status of any NUKI Smart Lock 2.0 or 3.0 connected to the NUKI bridge.
Usage
Once the quick setup is completed users are able to Lock and Unlock the NUKI smart lock from any Crestron Home user interface!
From the home page of the Crestron Home Interface the user clicks on the NUKI lock tile.
The user is presented with the current status of the lock (and door sensor if fitted) as well as options to Lock or Unlock the NUKI lock
Nuki System Setup
Before adding the LCD Driver to you system you must install and setup your Nuki Bridge and Nuki Lock as per the manufacturer instructions using the Nuki App.
Here is a screenshot of the application showing a correctly setup system including a Bridge and a single Lock.
The green indicators show a correct Server, bridge and Lock connection which are required for discovery and pairing.
NB: Once paired a cloud server connection is not required for the Crestron Home integration.
In the Nuki Bridge Settings the two developer options must be enabled:
API Quick Discovery – ( used for automatic discovery)
HttpAPI – (used for device control)
Add the Driver
Once you have added the Main Intercom Driver to a room you will see the controller UI tile in the room that you added the driver:
The Main page will show a button prompting you to change details of your Nuki Bridge.
Click the button to go straight to the device settings page.
Selecting Nuki Bridge
The Driver will automatically attempt to discover any Nuki Bridges on the same subnet as your device.
Click on a discovered Bridge to connect to that bridge or Click on the Connect Manually button to add a Bridge using a known IP Addess.
Top Tips:
We recommend setting up a MAC address reservation for your Nuki Bridge for the best stystem stability.
A Nuki Cloud server connection is required for the discovery to work and so we also give you the option to connect manually by adding the ip address of your bridge.
(this can be found in the Nuki App using Manage Bridges)
Pairing Nuki Bridge
If you have already paired with the bridge the pairing information and API key will be show if its the first time then press Pair with Bridge to start the pairing process.
Once you have pressed the Pair with Bridge button you can complete the pairing (within 30 seconds) by pressing the button on the Nuki Bridge.
Once pairing is complete the status on the page will show the API key and a Paired Status for your System and the Online Status will show ONLINE.
IP Details ViewPairing Progress View
Manually Pairing a Bridge
In the event that you cannot press the pair button or the discovery is not possible due to the lack of a server connection it is possible to manually add the IP and API details to the driver to pair the bridge manually.
We recommend using the automatic pairing above but this provides full flexibility to the installer.
Actions and Events
Normal Events
Event
Locked
Event fires when state is updated to locked / closed
Event
Unlocked
Event fires when state is updated to Unlocked / Opened
Function Actions
NB: All Function Actions will trigger Normal Events above
Once the quick setup is completed users are provided with the complete list of Inception arming options as well as detailed arming and disarming progress information.
From the room page or home page of the Crestron Home Interface the user clicks on the Inception Alarm UI tile
The user is presented with the current status of the alarm system and options to Disarm, Quick Arm or select from one of the Advanced Arming options
Advanced arming options include
Arm Full Area
Arm Perimeter Mode
Arm Night Mode
Advanced delayed arming options include
Delay Arm Full Area
Delay Arm Perimeter Mode
Delay Arm Night Mode
While arming and disarming the Inception alarm system users are shown detailed information of the progress
Inner Range Inception Drivers
Our suite of Inner Range Inception drivers allow you to make the most of this powerful Security and Access Controller. The Inner Range Inception Alarm UI Extension can be used as a standalone driver or in conjunction with any of the Inner Range Inception suite of drivers.
Inception Events & Actions Driver – Allows control and monitoring of 20 Inception security areas through the Crestron Home Actions and Events systems.
Inception Access Doors Driver – Allows control and monitoring of 200 Inception doors through the Crestron Home Actions and Events systems and a setup UI tile.
Inception Interface Outputs Driver – Allows control and monitoring of 200 Inception outputs through the Crestron Home Actions and Events systems and a setup UI tile.
Inception Interface Inputs Driver – Allows control and monitoring of 200 Inception inputs through the Crestron Home Actions and Events systems and a setup UI tile.
Inception Alarm UI Extension Driver – Allows control and monitoring of Inception Areas a simple extension user interface.
Inception Security Core Driver – Allows control and monitoring of Inception Areas using the Crestron Home native security user interfaces.
The Inception drivers can be used in any combination or as standalone drivers, except for the Inception Security Core driver. The Security Core driver must be purchased and used with the Inception Events & Actions driver as we do not provide any Actions and Events in the core module.
Inception User Permissions
The Inception Alarm UI Extension driver and additional Inception drivers connect to the Inception alarm as a standard user. The best practice is to create a user just for the Crestron Home system and set the web page profile to “REST Web Api User”. It is up to you if you share a single user (recommended) or create a user per driver. The user must be added the relevant permissions for the Areas, Doors, Inputs and Outputs that you wish to control and monitor.
Alarm actions that require a PIN to be entered will be associated with the the users PIN set in Inception. The user associated with the PIN will be the user that performs the action, with their permissions checked and their name logged in the review event history.
Any control requests of areas, outputs or doors that don’t require a PIN will be performed by the api user and must have the appropriate permissions set on all devices.
Here is an example of a user that is setup with access to the arm and disarm multiple security areas, control doors and monitor input status.
In addition, any of the security areas you wish to control should have the Multi-Mode Arming setting checked as shown in this screenshot.
Add the Driver
You can add the Inception alarm extension driver to any room you like using the Crestron Home Setup application
Follow the installation settings prompts and enter the connection details for the Inception Alarm
IP Id – the IP address of the Inception Alarm System
Username – the username of the Inception api user (see user permissions above)
Password – the password of the Inception api user (see user permissions above)
Once you have added the driver to the room, look for the UI tile in the Crestron Home application or on a TSW touchscreen to continue the setup
Inception Alarm Connection Settings
The main page will show you if the Inception alarm is not connected
You can update the IP address and user account details in the installer settings of the Crestron Home Setup App, or here in the Crestron Home UI.
To modify the Device connection details in the Crestron Home UI:
Press the Settings button
If prompted enter the Advanced User Password
Press the Device Setttings button
Connect to the Inception Alarm
Enter the IP Address of the Inception Alarm System
Enter the username of the user you set for API access
Enter the password of the user you set for API access
Press the Connect Device button
The connection status window will inform you of a successful connection or of any errors
Select the Inception Area
Once connected to the Inception Alarm, you will need to select the correct Area ID for the Inception security area that you would like to associate with this driver for status and control.
Press the Select Area
Select the Inception Area that you would like to associate
Return to the settings page
The Selected Area status window on the settings page informs you of which area you have selected
User Pins Settings
The user PIN is optional for arming and disarming opperations.
Arming and disarming operations with a PIN will be associated to the inception user with matching PIN for permissions and logging. Ensure you set the individual user permissions as required.
Arming and disarming operations without a PIN will use the permissions and logging of the API user. Ensure you set the API users permissions as required.
On the settings page you can turn the PIN requirement on and off for each of the following three functions:
Control and monitor the power consumption of AJAX Socket Automation modules
Connects to the homeowners AJAX account!
For cloud connected AJAX sockets, control the output (on/off) and monitor the power consumption.
Usage
Once the quick setup is completed users are able to monitor and control the sockets with just a few clicks!
From the room page on the Crestron Home user interface the user clicks on the AJAX Power tile to open the overview page.
The user is presented with a list of all the connected AJAX Sockets
Simple click the desired socket switch to toggle the socket between on and off
For more detailed information about an individual socket click the socket detail navigation button.
Here you can see detailed information for the AJAX Socket
use the refresh information button to get the latest energy usage information and socket status
Add the Driver
You can find the AJAX Power driver in the Drivers section of the Crestron Home Setup App under:
Drivers -> Security System -> AJAX
Add the AJAX Power driver to your desired room
Once you have added the driver to the room, look for the UI tile in the Crestron Home application or on a TSW touchscreen to continue the setup
AJAX Power Settings
The main page will show the current connection status to the homeowners AJAX account and AJAX hub.
When you are setting up the driver for the first time you will need to add the homeowners AJAX account details:
Press the Settings button
If prompted enter the Advanced User Password
Press the AJAX Account Setttings button
Add the homeowners AJAX account details
Enter the AJAX account username
Enter the AJAX account password
Press the Connect button
The connection status window will inform you of a successful connection or of any errors
Note: It is preferable to setup a unique AJAX user account for the Crestron Home system. In this way the homeowner can see the events and allow/deny access to the Crestron home system separately to the main user account.
To do this the homeowner would need to use the Send Invites process inside the Active Users page of the AJAX system
Select the homeowners AJAX hub
Once connected to the homeowners AJAX account you will need to select the correct AJAX hub
Press the Select AJAX Hub button
Select the AJAX hub that you would like to associate with this alarm driver
Return to the settings page
The selected hub status window on the settings page informs you of which hub you have selected
Crestron Home Actions and Events
Actions available in Crestron Home include:
Switch On
Switch Off
The Switch On and Switch Off actions require two parameters
Room Name
Socket Name
Please make sure the parameters match the room name and device name setup in the AJAX settings
AJAX Power Socket Overview
Once you have finished the AJAX account and hub setup you can navigate back to the AJAX power overview page where you will see a list of all AJAX Sockets connected to the AJAX hub
Press the refresh button to retrieve the latest list of connected plugs and up to date status
User Configurable Timers and Alarms for Crestron Home
Our Alarm Clock Driver allows you to enable the home owner to setup their own times and controls of their system putting them in control. A number of user controllable events can be exposed to the users which they can trigger using timers and daily alarms.
End User Usage
Once the quick setup is completed users are able to add new timers and alarms with just a few clicks!
The main page of the driver shows two options at the top of Timers and Alarms.
Users can select the type of control they wish to add.
Exsisting Timers and Alarms are shown below and can be reused or edited.
Timers
Press Edit to edit the values of the time
Press Play/Restart to Restart the timer.
Alarms
Exsisting Alarms are shown along with their current status
Click on the Alarm to edit the current settings.
Timer Details
Timers can be setup with a range of from a few seconds up to 24 hrs.
Set the Time ,in Hours Minutes and Seconds, that the timer shoul expire.
Set the Event or Events ( this is the event you want to happen when the timer expires)
Test the Event Directly from the event page ( v 4.3)
Start the timer running.
When the timer is complete the selected event is triggered.
NB: Timers do not persist a system reboot.
Alarm Details
Alarms can be setup to trigger once per day and up to seven days a week.
Set the Time ,in Hours Minutes , that the alarm should trigger.
Set the Event or Events ( this is the event you want to happen when the alarm triggers)
Test the Event Directly from the event page ( v 4.3)
Enable the timer.
Each day at the selected time if the day of the week is enabled the the selected event is triggered.
NB: Alarms Persist reboots.
Dealer Setup
Currently when setting up timers and alarms the event which the users can select are a list of ten Crestron Home Events.
These Crestron Home Events are Setup in the Crestron Home Setup App.
However in addition to this we have enabled the possibility to name these events to a friendly neam that your user will understand. Click on Event Settings to setup the Event Names.
We suggest you set these names first in the driver setup in the UI as this will make it easier to reference them in the setup app.
Adding Crestron Panels
In the setup app the ten events are shown with the names which you have setup in the Settings Pages of the driver.
Connect each of the required events to the appropriate Actions:
Allows you to play Chimes and Spoken Messages through your Sonos System
Sonos Chimes can be triggered from Crestron Home Actions & Events or from the Room Tile
Supports multiple Sonos V2 Devices
Supports up to 6 Chimes in total
Supports a single Chime Tile Action
The Chimes provided match those provided in our NAX Chimes driver
Sonos Chimes Driver
Room Tile
The Sonos Chimes Room Tile provides a simple point for the homeowner to action one of the chimes as well as access the chime settings.
You could locate the Sonos Chimes driver in a visible room like the kitchen and enable the Tile Action to play a chime like “Dinners Ready”
The Room Tile more button allows the homeowner access to the Sonos Chime settings where they can change the chimes and messages that are played.
Actions and Events
Each of the 6 configurable chimes can be linked to a Crestron Home Action and Event.
Using Actions and Events you could link one of the buttons on a Crestron keypad at the front door to play a doorbell chime throughout the house
Chime Options
The Chime Settings for each of the 6 chimes allows you to:
Setup the Sonos zones that will play the chime
Select from one of our pre recorded chimes
Create your own custom message using the Text To Speech chime
Setup the driver
Add the driver
You can find the SONOS Chime driver in the Drivers section of the Crestron Home Setup App under:
Drivers -> Audio Processor -> SONOS Chime
Add the SONOS Chime driver to your desired room
Once you have added the driver to the room, look for the UI tile in the Crestron Home application
Link to Sonos
When you first install the Sonos Chimes driver it will need to be linked with your Sonos account
Open a web browser connected to the network and navigate to theLCD Webapp using the IP address of the Crestron home processor
http://<IPADDRESS>/LCD/Index.html
Locate the Sonos Chimes driver in the list of installed drivers
Click the “Manage” button and open the authentication tab
Click the “Authenticate” button to start the linking process
Continue the Sonos user account sign in process
When the Authentication process is complete you will see the Authenticated Status on the Sonos Device Settings page on any Crestron Home UI
Setup the Chimes
Find the Sonos Chimes driver on any Crestron Home UI and enter the settings page.
Select one of the chimes you would like to modify
Zone
The Sonos zones that will play the chime when it is triggered
Press the “Change Zones” button to add or remove Sonos zones from this chime
Chime
Select the Chime option to play one of the pre recorded chimes when triggered
Press the “Change Chimes” button to select which chime you would to be played
Repeat ( new in version 4.1)
When enabled the chime will support repeat.
The chime will be played the number of times set in the number of times to repeat field. If this field is set to zero the chime will repeat until stopped.
Set the delay between repeats in seconds that should used. NB: That if you set a delay less than the length of the selected clip then the clip may not play in full
Text To Speech
Select the Text To Speech option to play a custom voice message when triggered
Enter the text for the message you would like to be played
Press the “Change Voice” button to select which voice you would like to use for this message
Playing and Stopping chimes from the UI
The Sonos Chimes can be triggered from the UI when the patricular chime is enabled in the settings. Once enabled the Play and (if the chime is set to repeat) Stop buttons are shown.
Setup the Triggers
The Sonos Chimes can be triggered from the Room Tile button or any Crestron Home Actions and Events sequence
Room Tile Action – (Not Currently Supported)
One of the chimes can be triggered by pressing the room tile button.
Press the “Change Tile Action” button
Set the text that you would like to appear on the Tile Action button
Select the Chime setting you would like to use for the tile action
Control and monitor your AJAX alarm system from Crestron Home
Connects to the homeowners AJAX account!
Arm and Disarm your cloud connected AJAX Alarm System with our AJAX Alarm Extension Driver.
Usage
Once the quick setup is completed users are able to Arm and Disarm the AJAX alarm system from any Crestron Home user interface!
From the home page of the Crestron Home Interface the user clicks on the AJAX alarm tile .
The user is presented with the current status of the alarm and options to Arm or Night Arm the AJAX alarm system
Simply click the alarm mode you would like to activate.
If a pin number is required to arm or disarm the system you will be prompted to enter the pin number now.
Enter your pin number and click the Done button
Add the Driver
You can find the AJAX Alarm driver in the Drivers section of the Crestron Home Setup App under:
Drivers -> Security System -> AJAX
Add the AJAX Alarm driver to your desired room
Once you have added the driver to the room, look for the UI tile in the Crestron Home application or on a TSW touchscreen to continue the setup
AJAX Alarm Settings
The main page will show the current connection status to the homeowners AJAX account and AJAX hub.
When you are setting up the driver for the first time you will need to add the homeowners AJAX account details:
Press the Settings button
If prompted enter the Advanced User Password
Press the AJAX Account Setttings button
Add the homeowners AJAX account details
Enter the AJAX account username
Enter the AJAX account password
Press the Connect button
The connection status window will inform you of a successful connection or of any errors
Note: It is preferable to setup a unique AJAX user account for the Crestron Home system. In this way the homeowner can see the events and allow/deny access to the Crestron home system separately to the main user account.
To do this the homeowner would need to use the Send Invites process inside the Active Users page of the AJAX system
Select the homeowners AJAX hub
Once connected to the homeowners AJAX account you will need to select the correct AJAX hub
Press the Select AJAX Hub button
Select the AJAX hub that you would like to associate with this alarm driver
Return to the settings page
The selected hub status window on the settings page informs you of which hub you have selected
Add User Pins
You can set a number of user pins that the user will be required to enter before Disarming or Arming the AJAX alarm system from inside the Crestron Home application or a TSW touchscreen.
The user pin feature is optional. On the settings page you can turn the feature on and off for each of the following three functions:
Pin required to Disarm the system
Pin required to Arm the system
Pin required to Night Arm the system
To set the user pin details:
Press the Set Pin button on the settings page
Enter a name for the user
Enter a pin number for the user (minimum 4 digits)
You can add more users and pins by pressing the Add User Pin button
AJAX Panic Button
The panic button can be hidden from the end user by deselecting the show panic button toggle
Crestron Home Actions and Events
Actions available in Crestron Home include:
Disarm
Arm
Night Arm
Get Alarm State
Note: The Get Alarm State action can be used up to 15 times a day. Subsequent triggers of the action will be blocked from communicating with the AJAX cloud services.
This driver allows you to send email notifications from your Crestron Home System.
All you need is a supported smtp account. We currently support smtp2go and sendinblue
NB: Gmail’s policies have changed and this makes gmail no longer supported.
Room Page Tile
The room page tile is the main entry point to the driver. The Driver is designed to allow users to enable and disable their own alerts once they have been setup using the Settings pages. The Home page and Room Tiles allow the user to access the driver user interface.
Main Page
Showing the five available alerts and allowing the users to enable and disable at an:
Alert Level (on this page)
User Level ( on the alert page)
Global Level (on this page)
Pressing the three dots allows you to edit the alert message on the Alert Page.
NB: The current Version Supports 10 Alerts!
Alert Pages
Alert Details
Users can edit per alert
Title
Message
Link Title
Link NB: A Link title must be entered if a link is added.
Enable Alert Per User
Enable or disable this alert per user.
The User Name can be edited on the Settings page
Driver Specific Settings
Setup Users
Label ( Displayed on the Main Page)
Email Address
( the users email address)
continued below
Setting Page
SMTP Details
Hostname
Port
Username
Password
Test Connection
Press to send a test email to all users ( with valid email addresses)
Email Status
Shows the result of the test email
Connecting Up Your Alert Actions.
Trigger the Alert
Alerts can be triggered by anything that supports a sequence in Crestron Home.
In the example here we have created a Quick Action Called Trigger Alert 1.
Trigger the Quick Action
In turn we have triggered the quick action from a simple contact closure added to the system from a doorbell.
It is of course possible to trigger from other drivers that expose events.
Setting Up Your smtp Account.
Setup a smtp2go account
Once you have setup an account you want to
navigate to setting/smtp_users
Here you will find the details for your connection:
Build your own UI with custom Buttons with feedback.
Like Quick Actions but so much more!
Usage
This Dynamic button driver is a flexible tool allowing you to achieve a number of different things with a single site Licence. You might setup a single button in a room to control a s Fire or a A Set of Buttons to control your Garden Sprinklers.
You can choose if the button appears on the Home page or just in the room and you can customise the Icon used on the Tile to make it appropriate to the usage.
BMS Example
For Example you might somply want to display the states of BMS Warnings in the property:
Displayed on the front page so users can at a glance check the status
Customise the Alert Reporting Text to show the current Status
Push Action on the button can be used to repoll the connected system
Sprinkler Example
Displayed on the front page so users can at a glance check the status
Customise the Names of the controlled Sprinklers
Group many Sprinklers into a single control
Setup
Using the Setup pages of the driver you can add and remove buttons and setup the naming and icons for each of the buttons you require.
The setup of the buttons is stored persistantly meaning once you setup a driver the settings will persist a reboot of the driver.
NB: Its also best practice to store a Gold cloud configuration when you are happy with your crestron home configuration and before and after making any changes.
Panel to Panel intercom between supported Crestron touchpanels is now achievable with our Intercom Extension.
Usage
Once the quick setup is completed users are able to dial from one Crestron Panel to another within the property with just a few clicks!
From the room page on the TSW Panel the user clicks on the Intercom tile to open the dialer.
The User is presented with a list of Extensions to call.
Simple click the desired extension to place a call.
The Call Flow for a normal panel to panel call is as Follows:
User A uses the User interface above to call Panel B.
Panel B Rings and a User B must answer the call.
Panel A then Rings and the User A must answer the callback.
At this point the point to point call is establblished and is ended by either user pressing the end call button.
System Setup
Once you have added the Main Intercom Driver to a room you will see the controller UI tile in the room that you added the driver:
The Main page will show a button prompting you to add extensions.
Click the button to go straight to the settings page.
On the Settings page you can add Crestron Rava Extensions using device discovery.
Or you can choose to add extensions manually.
Adding Extensions
The Main Settings Page Shows
List of Existing extensions.
(Clickable to edit)
Options to add Extentions
Crestron (using Discovery)
Manual.
Adding Crestron Panels
When you first connect and after adding new Rava devices you will need to press Discover devices.
This will discover all Crestron Rava Devices on the LAN.
The process takes approximately 30 seconds to complete and once finished you will see a list of Rava SIP panels ready to add to your system.
Add the extensions that you want to use to the system one by one.
(You can return to the list to add more by pressing the Button)
NB: We recommend that Crestron panels are setup with a fixed IP or a Statically assigned IP addess by DHCP.
After adding an extension you will go back to the main settings page.
The Extension Showing up in the List of Extensions with the default information (Model-IPAddress)
From the main settings page you can return to add more extensions or continue to complete the setup of your added extensions.
Clicking on the newly added extension allows you to edit the Name of the extension which is presented to the user.
The name brought in from the system discovery is the Model name followed by the IP Address of the panel.
If you want to confirm that you have the correct panel before naming it then simply use the “Dial Panel to Identify ” button. This places a call to ring the panel allowing you to confirm which panel is which.
Adding non crestron Extensions
Extensions can be added manually to the system using the “Add Extensions” button on settings page of the central controller driver.
Non Crestron Sip phones can be added to be dialled from the system.
For example a 2N intercom can be added to the extension list or a concierge SIP Phone on the local area network.
It is possible with the correct NAT translation or by using a STUN Server to setup cross subnet calls in an MDU environment.
For more information or to discuss this capability for an MDU project please contact us.
Adding Addition Extensions After First Setup
Adding extensions to a system follows the same pattern as above. When an extension is added to the central controller all of the endpoint drivers are updated with the new extensions information and hence it is added to the list of available extensions to call.
Removing Extensions After First Setup
Extensions can be removed from the system on the setup page of the central controller driver. Click on the extension to remove
Extensions can be removed from the system on the setup page of the central controller driver. Click on the extension to remove to see that extensions detail page and then click the remove button to remove the extension from the system.
The Associated Intercom endpoint driver will need to be removed from the system using the setup app or associated with a different extension.
Adding Endpoint Drivers
We recommend adding an endpoint driver for each rava panel into the room where that panel is located. If the room has multiple panels you can either decide to only use one for intercom or put two endpoint drivers in the room making it obvious by naming which is which.
Once configured each driver will be paired to a panel.
The Endpoint Drivers have a very simple setup where the driver’s needs to be paired to its panel.
When first loaded to the system the driver main page will prompt you to set an extension.
On the Settings page Click Change Extension to assign an Extension to this driver.
A list of all extensions ( setup using the Main Intercom Driver) will be shown.
Select the Extension that you want this driver to be associated with.
When you exit settings and return to the driver main page you will see options to call the other extensions in the system.
NB: These endpoint tiles are designed to be used only on the Rava Panel which they are assigned to.
Integrators are advised to consider hiding other rooms on the Rava Panels Crestron Home Application using the show rooms function in advanced settings.
The drivers added to the System can be hidden easily on Rava Panels but on Mobile devices which are configured by users its more complicated to manage this. Calls can be controlled by the drivers running on mobile applications or non rava panels but the flow will not work as described unless a user is ready to accept an incoming call at both of the ends of the intercom call established.
Crestron Rava Panel (Zero)Configuration
Each Panel in your crestron home system should be setup with unique SIP extension number. Crestron Panels Self configure by doing a broadcast handshake on the network so you shouldn’t normally need to set your extension numbers manually.
If you want to make the experiance really slick for your users then Each Panel should also have a unique SIP Name for example “Lounge Door Panel” this means users will see information on who is calling them before choosing to answer a call.
This can be achieved by using the SIPLOCALNAME cmd at the panels console.
TSW-1060>SIPLOCALNAME GAMES ROOM Success: New parameter has been set
Allows you to control your 2N Doorstation directly from Simpl Windows
Relay and IO both exposed in Simpl Windows
This hardware interface is intended to simplify the connection of your Crestron Custom system to the popular 2N range of doorstation hardware. The Switch controls and IO input can be used in tandem with the SIP call functionality to allow a complete solution. In addition we offer a range of Door and Lock UI Tiles which can be used to give a user interface to the hardware.
Module
The software is delivered as a Simpl+ Module which can be used within a Simpl Windows Custom Program.
Parameters including
Licence Key and Network Configuration are all required.
The Switch INputs are controlled by Pulsing the
Inputs.
State Outputs are Latching Outputs including :
DeviceOnlineFb
SwitchState1 and SwitchState2
Input, Output and Relay States.
NB: Only the first Relay,INput and Output Supported.
All other digital outputs are pulses representing events.
The Response from the licensing call is reported to a serial string.
NB: The processor must be connected to the internet for initial activation.
2N Device Setup and Connection
To make use of the Switch and I/O API you will need to apply a 2N Enhanced Integration Licence.
We suggest when first connection you set authentication to None.
The Driver requires a TCP Connection Type and can support Digest , Basic or no Authentication.
If Authentication is used a user must be created and given control and monitoring on I/O Access and control privileges on Switch Access .
You need to create a user and give that user the privileges:
NB: the user is not the same as the user that you use to get into the web Interface.You have to add and enable one of the accounts on the HTTP API Page.
The function applied to Switch 1 or Switch 2 are configured in the 2N web interface.
NB: Relays and Outputs are not controlled directly by the module.
The Module controls the Swithes which in turn control the relay or Output.
Sample Program and Xpanel
A Sample Program and Xpanel are included in the download.
NB: You will need to update the licence key in the program to a valid licence key to use the sample program, there is currently no grace period on use.
The AIR Xpanel need to be setup with connection details of the processor and IP-ID-03.
This Xpanel is provided to Allow Initial familiarization with the Module.
Adding the Module to a new or exsisting Project
The Download comes with three zip Files within the SIMPL Folder:
2NHardwareInterfaceModuleFiles.zip
2NSampleLCDControlSystems_MC4_archive.zip
2NSampleLCDControlSystems_CP4_archive.zip
The First Package contains all of the files required to use the module within your own program or in a new Simpl Windows Program.
Extract the files to the root of your project. ( same level as you *.smw file). Then reopen the SMW file or use Project->ReSync Project for these to appear in your Project Modules.
The Download also contains a VTPRO Folder with the Xpanel files which are for use with the sample programs:
Our InnerRange is a suite of drivers to allow you to make the most of this powerful Security and Access Controller. The Core Driver is only available in a package along with the Events and Actions Driver ( this is as we don’t support Core Events). All the other companion drivers can be used standalone on a system allowing you to use the subsystems of the Inception independently.
Hardware Configuration
The core and additional drivers connect to the Inception as a standard user. The best practice is to create a user just for the Crestron system and set the web page profile to “REST Web Api User”. Its up to you if you share a single user (recommended) or create a user per driver. The user must be added the relevant permissions for the Areas, Doors, Inputs and Outputs that you wish to control and monitor.
Core Alarm actions require a user pin to be entered and the userassociated with that PIN in Inception will be the user that performs the action, with their permissions checked and their name logged in the review event history.
Any control requests of areas, outputs or doors that don’t require a PIN will be performed by the api user and must have permissions on all devices.
Here is an Example of a User Setup to Access Alarms , Doors and Inputs.
In addition any Security Areas you wish to control should have the Multi-Mode Arming Setting Checked as show in the Screenshot here
Adding drivers to the system
Drivers are all located in Security System Type under the manufacturer “Inner Range”
Core Alarm Driver
This is a native Crestron home Security System Driver and only appears on the Home page and not in the room in which the driver is loaded. We suggest you add the core driver and supplementary drivers to a Rack room hidden from the client.
Home Page
The home page tile is the access point for users into the security sytem.
Alarm Areas
Area are added dynamically to the system
Area Names are pulled in from the Alarm system.
Main Arm and Disarm Functions can be controlled directly from this page.
Known Issue:
If an area is removed from the alarm it will remain visible until a Crestron Home Reboot.
Area Page
The induvidual Area Page shows area status and all available area controls.
Swiping right takes you to the Global System Page
Global Alarm Control
Global Status Text
Alarm Status
Door Command Status
Panic Status
Licence Status
Global Function buttons
Lock All Doors
Close All Outputs
Panic Alarm
User Pin
When you first attempt an alarm action you will be prompted to enter your inception user pin.
You can choose to store the pin on the user device by ticking the box.
Once a pin has been saved you will no longer be prompted for a user pin.
Customisation
Per UI Customisation
Security Areas can be hidden per panel in the Advanced Settings section of the panel.
Global Customisation
Using the setup app areas can be hidden globally
Friendly names can also be changed from the set names in the security System.
More Customisation
Alarm Functions can be Globally Enabled and Disabled.
Function Buttons
Enable Disable
Rename
Change Label
Actions and Events (Core Driver)
Security System Types Provide Events based on Alarm States.
However we do not support these events in our Core Driver and instead:
We advise loading and using the Events and Actions provided in our Dedicated Module
CHINNEREVENTS
(See Below)
ALARM EVENTS
Events and Actions for Alarm Zones (companion to core)
A Seperate extension driver is provided to expose Actions and Events.
This driver must be loaded to your crestron home system ( there is no Extension UI). Once loaded and setup as described here you will see events and Actions allowing you to control your alarm System.
The User account used in the hardware setup should have permissions on all areas you want to control/monitor.
Events
Events listed below are supported for up to 20 Areas per System.
Alarm
ArmAway
StayArm
Disarmed
These events are triggered once on the initial change of state.
The Areas are Referenced using the Area ReportingID (See more detail below)
Actions
Actions are supported for up to 20 Areas per System
The Areas are Referenced using the Area ReportingID (See more detail below)
Please note that this method of control allows you to potentially control the the Alarm directly without user passwords.
This functionality should be used with caution if you are to maintain the validity of your alarm system security.
Inception Access
Events and Actions for Doors
A Seperate extension driver is provided to expose Actions and Events for Doors as defined in the .
This driver must be loaded to your crestron home system and provides a basic UI for verification of the connection and permissions.
NB: Generally this driver would be placed in a room hidden to the client and all access be via events and actions.
The User account used in the hardware setup should have permissions on all doors you want to control/monitor.
On the main page of the driver you see a list of all the doors in your system
Doors which you dont have permission will be shown bu greyed out.
Clicking a door will show you the detail page for the door which shows the status of the door.
NB: Open and Close Status is only shown when a reed switch is connected and correctly configered.
Events
Events listed below are supported for up to 20 Doors per System.
Unlocked
Locked
Opened
Closed
Forced
Held Open
These events are triggered once on the initial change of state.
The Doors are Referenced using the ReportingID
Actions
Actions are supported for up to 20 Doors per System
The Doors are Referenced using the ReportingID
Inception Inputs
Events and Actions for Inputs
A Seperate extension driver is provided to expose Actions and Events for Inputs as defined in the .
This driver must be loaded to your crestron home system and provides a basic UI for verification of the connection and permissions.
NB: Generally this driver would be placed in a room hidden to the client and all access be via events and actions.
The User account used in the hardware setup should have permissions on all inputs you want to control/monitor.
On the main page of the driver you see a list of all the inputs in your system
Inputs which you dont have permission will be shown but greyed out.
Clicking an input will show you the detail page for the door which shows the status of the input.
Actons of Isolate and De-Isolate are also available.
Events
Events listed below are supported for up to 20 inputs.
Inactive
Active
Low Battery
Poll Failed
These events are triggered once on the initial change of state.
The Inputs are Referenced using the ReportingID
Actions
Actions are supported for up to 20 Inputs per System
The Doors are Referenced using the ReportingID
Inception Outputs
Events and Actions for Outputs
A Seperate extension driver is provided to expose Actions and Events for Inputs as defined in the .
This driver must be loaded to your crestron home system and provides a basic UI for verification of the connection and permissions.
NB: Generally this driver would be placed in a room hidden to the client and all access be via events and actions.
The User account used in the hardware setup should have permissions on all outputs you want to control/monitor.
On the main page of the driver you see a list of all the ouputs in your system
Outputs which you dont have permission will be shown but greyed out.
Clicking an output will show you the detail page for the door which shows the status of the output.
Actions allow you to test control of the output.
Events
Events listed below are supported for up to 20 inputs.
Inactive
Active
Low Battery
Poll Failed
These events are triggered once on the initial change of state.
The Outputs are Referenced using the ReportingID
Actions
Actions are supported for up to 20 Outputs per System
The Doors are Referenced using the ReportingID
FAQ
Can we use more than 20 inputs,outputs,Doors
We will be providing a free upgrade soon that will support more than 20.
Monitor Temperature and Humidity in your Crestron Home Setup.
The process of maturation of the wine bottles and barrels in cellars requires carefully protected climatic conditions that are stable over time. It is especially important to control the temperature and humidity of the environment, creating an ideal microclimate for bottles and barrels.
Optimal temperature conditions should be between 12 and 16 °C for red wines and between 10 and 12 °C for white wines. In particular, it is important to avoid sudden changes in temperature and temperatures that are too high or too low.
Humidity should be kept constantly between 70-80 %rh. Very low humidity air is harmful to wine because it favors uncontrolled evaporation and oxidation. This driver and hardware combination allows you to ensure your investment is protected in an ideal environment.
Home Page Tile Actions
The home page navigates you straight to the user interface of the driver.
The Time shows the Current temperature of the monitoring sensor.
Temperature Thresholds can be connected up to alerts or monitoring tools to ensure users are notified and remedial action can be taken.
The digital inputs might be used to monitor the cellar door which might be crucial in ensuring temperature and humidity of the space.
Device Configuration and Settings
The device supports Poe or Local 5.5VDC power supply. Once on the network the device can be located using a device discovery tool which can be found here (Opens in a new window).
The username and password can be changed from the defaults in the web interface of the device.
The unit defaults to :
User: root
Password: nti
Network Settings can also be configured using the web interface. The device needs to be routable to your crestron home processor. The IP address of the device is required for the driver settings.
The device username,password and IP Address need to be entered into the driver settings page in the Crestron Home setup app.
The information below details the specific configuration to allow the hardware to work with the associated Crestron Home Driver.
WebRelay Module
Our recommendations:
Static IP address on the same Subnet
WebRelay Series Modules
Click here for the manufacturers WebRelay configuration manual.
Hardware Covered
X-WR-1R12-1I-I
X-WR-1R12-1I-E
X-WR-1R12-1I5-I
X-WR-1R12-1I24-I
X-WR-1R12-1I5-E
Hardware Connections
IP / LAN Settings
Power the module and connect to network.
Set IP address on computer to be on the same network as the module. (Example: Set computer to 192.168.1.50)
To configure the module, open a web browser and enter: http://192.168.1.2/setup.html
Assign permanent IP address to module, then restart module.
Restore computer’s IP address, if necessary, and access the module at its new IP address to finish setup.
Remember the new password well or write it down just in case, if you forget the password, you will have to reset the intercom to default values (refer to the Installation Manual of your intercom model) and lose all your current configuration changes.
IP Address: 192.168.1.2 Subnet Mask: 255.255.255.0 Control Page Web Address: http://192.168.1.2 Control Password: (no password set) Setup Page Web Address: http://192.168.1.2/setup.html Setup Username: admin Setup Password: webrelay (all lower case)
Network port usage
Service
Port / Protocol
Detail
Control
80 (TCP)
TCP Port 80 is the default control port but this can be changed.
Web Server
80
The port used to display the control and configuration web pages.
Modbus
502
Modbus is a messaging structure protocol used in the industrial, manufacturing, control and automation industries. It is an open protocol and offers interoperability with software and devices from other manufacturers. If Modbus is not used, this setting can be ignored. Modbus communications are disabled whenever the control password is enabled.
WebRelay Switching Settings
2N Gate IO Crestron Home Driver
A Driver for Crestron Home allowing control of the Mode Lighting Edin+ system.
Note1 : only PE6/8/9 has outlets switching capability and are hence compatible.
Note2: please make sure to use latest firmware (below is the minimum requirements)
Note3: all driver testing has been on a PE8324G
Add the Driver
You can add the ATEN driver to any room you like using the Crestron Home Setup application. The driver can be found under Power in the driver categories.
Enter in the IP Address, name, password and number of outlets of the ATEN PDU.
Room Page Tile
The room page tile is the main entry point to the driver. The Home page and Room Tiles allow the user to access the driver user interface.
Home Page Tile Actions
The home page navigates you straight to the user interface of the driver.
Driver User Interface
Output Selection
Launch Output Selection page
NB: If all outlets are hidden then the Output Selection button is also hidden. (however if this is the case we would recommend putting the driver in a hidden room.
Driver Settings
Launch Settings (password protected)
Output Selection
Select the Outlet you wish to control. This will present a new page to control the respective outlet.
NB: Using the Settings pages you can decide which of the PDU outlets to show and hide in this list.
That way you can select a small subset of pdu outlets to leave visible to your users.
UPDATED Version v4.1 now supports Priority and Sound Alert Selection
This driver allows you to send push notifications from your Crestron Home System to your iOS or Android device using an application called Pushover.
If you haven’t already setup the driver for use and setup a Pushover account and Application then you will need to create an account and download the pushover app. See details below.
Room Page Tile
The room page tile is the main entry point to the driver. The driver is designed to allow users to enable and disable their own alerts once they have been setup using the Settings pages. The Home page and Room Tiles allow the user to access the driver user interface.
Main Page
Showing the ten available alerts and allowing the users to enable and disable at an:
Alert Level (on this page)
User Level (on the alert page)
Global Level (on this page)
Pressing the three dots allows you to edit the alert message on the Alert page.
Alert Pages
Users can edit per alert
Title
Message
Link Title
Link NB: A Link Title must be entered if a link is added
Selected Sound for the alert
Selected Priority for the alert
Alert Pages Continued
Test Alert
Press Send Now to test the selected alert
Status of the alert will be displayed after testing
Shows the messages remaining in your monthly allowance
Enable Alert Per User
Enable or disable this alert per user
The User Name can be edited on the Settings page
Alert Sound
Select the sound to play when the alert is triggered
“None” is an option if you don’t want a sound to play for that alert
Alert Priority
Select the priority for the alert when triggered
Driver Specific Settings
Setup users
Label (displayed on the Main page)
Key (the users Pushover User Key)
continued below
Driver Specific Settings Continued
Pushover Application Key
Enter your own API Token/Key for the project (See below for details)
Test Connection
Press to send a test message to all users (with valid keys)
Pushover Status
Shows the result of the test notification
Shows the messages remaining in your monthly allowance
Choose whether to display a Pushover tile on the Home page
Connecting Up Your Alert Actions.
Trigger the Alert
Alerts can be triggered by anything that supports a sequence in Crestron Home.
In the example here we have created a Quick Action Called Trigger Alert 1.
Trigger the Quick Action
In turn we have triggered the quick action from a simple contact closure added to the system from a doorbell.
It is of course possible to trigger from other drivers that expose events.
NB: A single application can push messages to multiple pushover accounts.
Additional Users can download the app and add their user keys without needing to create an application.
Pricing
As noted above a Normal Induvidual account is all that is required for both the Application and for the induvidual users. The cost is based on using the Pushover app on the device recieving the notifications which costs st a $5 USD one-time purchase on each platform. Currently Pushover offer a 30 day trial.
The room page tile is the main entry point to the driver. Pressing on the tile will toggle the lock state. The lock will latch open unless auto-lock is enabled where it will lock after the preset auto-lock delay.
Home Page Tile Actions
The home page navigates you straight to the user interface of the driver.
Driver User Interface
Manual Control
Lock
Unlock ( this is still affected by auto-lock if enabled)
Activity Feed ( Shows information about recent actions)
This is a generic datasheet showing the common functionality of our UI Tiles that provide a Switcher function. All of the control functions are common to the whole range of these UI Tiles. This datasheet uses the FireSwitch as an example of the functionality.
Room Page Tile
The room page tile is the main entry point to the driver. Pressing on the tile will toggle the fire state. The fire will turn off if currently on and and on if currently off.
If any timers are currently running then the fire cannot be turned on or the timer cancelled from the tile.
Instead use the top right of the tile to navigate to the main Driver user interface.
Home Page Tile Actions
The home page tile navigates you straight to the user interface of the driver.
Driver User Interface
Status
This shows the status as per the tiles
Controls
Fire On
Fire Off
Time Delay Off
Time Delay Off Buttons
Configurable in settings
Hide if not required
Driver Settings
Launch Settings (password protected)
Dependant upon which switch type driver tile is purchased the icon and the name of the item being switched is changed appropriately.
For example, if a SprinklerSwitch had been installed then a sprinkler icon would be shown and within the UI “Sprinkler” would appear instead of Fire.
This is a generic datasheet showing the common functionality of our UI Tiles that provide a Lock or Door function. All of the control functions are common to the whole range of these UI Tiles. This datasheet uses the Lock as an example of this functionality.
Find all Locks and Door Ui Tiles in the following category: Door Access ->> Various
Room Page Tile
The room page tile is the main entry point to the driver. Pressing on the tile will toggle the lock state. The lock will latch open unless auto-lock is enabled where it will lock after the preset auto-lock delay.
Home Page Tile Actions
The home page navigates you straight to the user interface of the driver.
Driver User Interface
Manual Control
Lock
Unlock (this is still affected by auto-lock if enabled)
Activity Feed (shows information about recent actions)
Driver Settings
Launch Settings (password protected)
Driver Specific Settings
Auto Lock
Enable
Disable
Time (in seconds, min 10 – max 600)
Open Close Delay
Time (in seconds, min 2 – max 10)
This defines how long the Lock or door takes to close and open.
Display on home page (tick box)
Enable
Disable
Licence
Launch Licence Settings
Actions and Events
These drivers feature a range of Actions and Events to allow you to connect up to hardware or other drivers.
The Events you need to use will be highly dependant on your required hardware setup.
Settings
Parameter
Value
Parameter 2
Value
Description
Auto Close
Switch
When the Auto Close feature is turned on the driver fires the Do Close Door event after the door has been open for the duration set in Auto Close Time
Auto Close Time
Seconds
The duration to leave the door open before sending the Do Close Door event if the Auto Close feature is turned on
Set Time For Open and Close Function
Seconds
Usually used with motorised gates and doors, this is the duration to show the door as opening or closing
Display on home page
Checkbox
Settings Password Control
Checkbox
Actions
Parameter
Value
Parameter 2
Value
Description
Close
Triggers the Do Close Door event and shows the door as closed
Close With Delay
Delay (s)
0 - 600 seconds
Waits for the delay time then triggers the Do Close Door event and shows the door as closed
Disable Auto Close
Turns off the Auto Close feature
Door Closed Sensor
Changes the door state to Closed. If the previous door state was Door Opened (forced) then the Do Close Door event will also be triggered
Door Open Sensor
Changes the door state to Door Opened (forced) if the previous door state was closed
Enable Auto Close
Turns on the Auto Close feature
Open
Triggers the Do Open Door event and shows the door as open
Open Door With Auto Relock
Auto Close Time (s)
0 - 600 seconds
Triggers the Do Open Door event and shows the door as open. Waits for the delay time then triggers the Do Close Door event and shows the door as closed. Note: This action is separate to the Auto Close Feature
Set Auto Close Time
Auto Close Time (s)
0 - 600 seconds
Sets the duration to leave the door open before sending the Do Close Door event if the Auto Close feature is turned on
Events
Parameter
Value
Parameter 2
Value
Description
Do Close Door
This event fires whenever the door is set to the closed state from the user interface, the close door actions or the auto close feature
Do Open Door
This event fires whenever the door is set to the open state from the user interface or the open door actions
Close Button Pressed
This event fires whenever the close button is pressed on the user interface
Open Button Pressed
This event fires whenever the open button is pressed on the user interface
Tile Button Pressed
This event fires whenever the room tile is pressed on the user interface
Normal Events
Event
Locked / Closed
Event fires when state is updated to locked / closed
Event
Unlocked / Opened
Event fires when state is updated to Unlocked / Opened
Button Presses
Event
Lock/Close Button Pressed
Event triggered when any command button is pressed e.g. Tile button, Lock Button , Open Button ( Use this event to trigger a momentary release)
Event
UnLock/Open Button Pressed
Use to trigger a momentary release.
Event
Tile Button Pressed
Suggested use: Use to trigger a momentary release. NB: The UITile State will toggle.
Control Sensor Actions
Action
Control Sensor Opened
If Locked the this causes the UI to show a “forced open” message
Action
Control Sensor Closed
If the previous state (before a forced open) was Locked then the door sensor closing will cause the Lock state to be changed to locked NB: A Locked / Closed Event will be triggered.
Function Actions
NB: All Function Actions will trigger Normal Events above
Action
Unlock / Open
Unlock / Close from an Action
Action
Lock / Close
Lock / Open from an Action
Action
Unlock / Open with Auto Re-lock /Re-Close
This Action allows the installer to set a custom delay before relocking / reclosing
The information below details the specific configuration to allow the hardware to work with the associated Crestron Home Driver.
Our recommendations:
Static IP address on the same Subnet
Global Cache IP to Contact Closure (IP2CC) Modules
Click here for the manufacturers Global Cache Configuration manual.
Hardware Covered
IP2CC
IP2CC-P
WF2CC
IP / LAN Settings
If you have the WF2IR then please read here for specific setup info.
Global Caché network-connected products currently support network connectivity through Ethernet or WiFi, depending on product line and model. By default, all devices are configured to automatically acquire their IP configuration via DHCP. However, if a DHCP server is not available, devices will assume a default static IP address as specified in each device’s documentation. Configuration of a device’s network and I/O settings can be managed through the product’s configuration web pages, or via API commands if supported by the product Global Caché Unified TCP API (see here).
For detailed information about configuration and operation of the various products from a user perspective, please refer to each product’s Quick Start or User Guide here.
Connect both an RJ45 (Ethernet) network cable and power supply to your iTach unit. If the iTach is PoE (Power over Ethernet) enabled, connecting a power supply is not necessary.
In its default configuration, the iTach TCP/IP models use DHCP to automatically obtain an IP address from your router. To determine the iTach’s IP address, download the iHelp application here.
Run iHelp on a Windows PC connected to your network. iHelp listens for Global Caché multicast beacons and displays the iTach IP address and other details within one minute. If a DHCP server is not present, defaulted iTach units will reside at IP 192.168.1.70.
Troubleshooting
iTach configuration can be reset to factory defaults by inserting a large metal paper clip into the small opening located to the right of the power connector. Only insert the paper clip approximately 1/8” (3mm) in. The LEDs on the front of the iTach will rapidly blink in unison, indicating a reset. Use a light touch when resetting your iTach, as force may damage your iTach hardware irreparably.
Network Port Usage
Service
Port / Protocol
Detail
Control
4998 (TCP)
Control Port
Discovery Service
9131 (UDP)
The beacon is a UDP packet sent to the multicast IP address 239.255.250.250 on UDP port number 9131. Any system listening to this address and port will receive the periodic beacon message. The message is sent 3 seconds after power on and then at random intervals of 10 to 60 seconds thereafter.
Web Server
80
The port used to display the control and configuration web pages
Network Capacity: Notes on Simultaneous TCP Connections The iTach Series of devices supports 8 simultaneous open TCP software connections.
Firmware
The Global Cache Firmware is accessible through Global Cache support portal here.
2N Gate IO Crestron Home Driver
A Driver for Crestron Home allowing control of the Mode Lighting Edin+ system.
Allows you to control your 2N Doorstation directly from Crestron Home
Relay and IO both exposed in Crestron home
Supports the Crestron Actions & Events
Compatible with any native controls or connect to one of our tile drivers.
This hardware interface is intended to simplify the connection of your Crestron Home system to the popular 2N range of doorstation hardware. The Switch controls and IO input can be used in tandem with the SIP call functionality to allow a complete solution. In addition we offer a range of Door and Lock UI Tiles which can be used to give a user interface to the hardware. NB: the UI Tile and pages associated with this tile are not intended to be “customer facing”
When a 2N Intercom is used in a crestron System for Calling the user is presented with a Call page as seen below.
Supported Devices
This driver supports the API on the following devices 2N IP intercoms, 2N® SIP Audio Converter, 2N Access Unit 1.0, 2.0, M
2N Licence Requirements
Licensing on 2N has changed and for most of the functionality of our driver you now dont need any additional license.
The only additional license available is the Gold Licence and you will still need this if you want to use the motion detection parts of our driver.
Read more about this change to licensing from our Friends at Aldous Systems !
Rack Room Tile
This Hardware interface driver provides a simple UI intended for use by the integrator to verify the operation of the hardware.
The driver would generally not be client facing and would loaded to a “hidden” room in the system such as a rack room.
All hardware interface have a generic image showing two adjacent rings.
Main Page Actions
The home page tile navigates you straight to the main user interface of the driver.
This pages allows you to test the function of the controls and see monitoring of the IO via the Crestron Home App.
Actions and Events
Actions
Action
Description
Notes
Switch 1 On
Activates Switch 1
Switch 1 Off
Deactivates Switch 1
Switch 2 On
Activates Switch 2
This can be used to end all an incoming call when the open gate button is pressed.
Swithc 2 Off
Deactivates Switch 2
Dial Panels
Makes a call from the 2N Intercom to the rava:CRESTRON call group.
End Dial Panels
Ends the call make using the "Dial Panels " command.
End All Sip Calls
Ends all active calls on the 2N Intercom device
Supported from v4.2.0.0
Events
Event
Description
Notes
Input 1 Closed
Event called when Input 1 closed
Input 1 Opened
Event called when Input 1 closed
Relay 1 Activated
Event called when Relay 1 activated
Relay 1 Deactivated
Event called when Relay 1 Deactivated
Output 1 Activated
Event called when Output 1 activated
Output 1 Deactivated
Event called when Output 1 Deactivated
Switch 1 Activated
Event called when Switch 1 activated
Switch 1 Deactivated
Event called when Switch 1 Deactivated
Switch 2 Activated
Event called when Switch 2 activated
Switch 2 Deactivated
Event called when Switch 2 Deactivated
Motiton Detected
Motion Detected based on video detection area and sensitivity threshold setting.
Noise Detected
Noise Detected based on noise detection level threshold.
Call Button Pressed
Call button on intercom presses ( Commonly used to trigger a doorbell using our Sonos Chime driver)
SIP Call Flow ( This functionality is not dependent on the driver)
We include and explanation here as the setup and usage is very common when using 2N in Crestron home.
When a guest or visitor presses the call button in a crestron home system configured for a 2N intercom the Crestron Rava Panels in the system ring with the incoming call from the intercom. This is done by setting up the dialer in the intercom
When the Crestron Home user presses the Actions button on this page a subsequent page showing all whole house quick actions is shown.
A common setup is to make a “whole house quick action” which opens the Gate using the 2N Switch Action
To make use of the Switch and I/O API you dont need any additional license on the 2N.
We suggest when first connection you set authentication to None.
The Driver requires a TCP Connection Type and can support Digest , Basic or no Authentication.
If Authentication is used a user must be created and given control and monitoring on I/O Access and control privileges on Switch Access .
You need to create a user and give that user the privileges:
NB: the user is not the same as the user that you use to get into the web Interface.You have to add and enable one of the accounts on the HTTP API Page.
The function applied to Switch 1 or Switch 2 are configured in the 2N web interface.
2N Doorstation Setup Video
New Features v3
Summary
In the version 3 upgrade to our drivers we added a number of features to the standard 2N Module.
We exposed the State of the Relay in addition to the State of the “Switches”. This means if these are controlled by other systems you can keep everything in state.
We also added a couple of new monitored items to the events list.
With the Audio Licence on your 2N Intercom you can enable noise detection. Motion Detection is enabled on the internal intercom camera with the Video Licence. To read more about what licenses allow what on 2n follow this link.
In the version 3 module these events are brought into Crestron home as an Events. See a deomstration on our youtube channel here
Call Control
This new function allows basic control of the SIP calling on the 2N Intercom. When the call button is pressed on a 2N intercom setup for crestron home the intercom Dials “rava:CRESTRON” which initiates a call to all touchscreens in this default ring group.
NOTE: CRESTRON is the default ring groups for all shipping TSW‑x60 / 70 touch screens. This driver only supports this standard default CRESTRON call group.
Actions
(In addition to previously supported features)
Dial Panels ( Calls the Rava Dial Group CRESTRON)
End SIP Call Ends the call made by the Dial Panels Action ( Will not end a cll made from the call button)
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
