Nuki Smart Lock User Manual

Control and monitor your NUKI Smart locks from Crestron Home

Connects to the NUKI bridge!

Lock, unlock and view the door status of any NUKI Smart Lock 2.0 or 3.0 connected to the NUKI bridge.

Usage

Once the quick setup is completed users are able to Lock and Unlock the NUKI smart lock from any Crestron Home user interface!

From the home page of the Crestron Home Interface the user clicks on the NUKI lock tile.

The user is presented with the current status of the lock (and door sensor if fitted) as well as options to Lock or Unlock the NUKI lock

Nuki System Setup

Before adding the LCD Driver to you system you must install and setup your Nuki Bridge and Nuki Lock as per the manufacturer instructions using the Nuki App.

Here is a screenshot of the application showing a correctly setup system including a Bridge and a single Lock.

The green indicators show a correct Server, bridge and Lock connection which are required for discovery and pairing.

NB: Once paired a cloud server connection is not required for the Crestron Home integration.

In the Nuki Bridge Settings the two developer options must be enabled:

  • API Quick Discovery – ( used for automatic discovery)
  • HttpAPI – (used for device control)

Add the Driver

Once you have added the Main Intercom Driver to a room you will see the controller UI tile in the room that you added the driver:

The Main page will show a button prompting you to change details of your Nuki Bridge.

Click the button to go straight to the device settings page.

Selecting Nuki Bridge

The Driver will automatically attempt to discover any Nuki Bridges on the same subnet as your device.

Click on a discovered Bridge to connect to that bridge or Click on the Connect Manually button to add a Bridge using a known IP Addess.

Top Tips:

We recommend setting up a MAC address reservation for your Nuki Bridge for the best stystem stability.

A Nuki Cloud server connection is required for the discovery to work and so we also give you the option to connect manually by adding the ip address of your bridge.

(this can be found in the Nuki App using Manage Bridges)

Pairing Nuki Bridge

If you have already paired with the bridge the pairing information and API key will be show if its the first time then press Pair with Bridge to start the pairing process.

Once you have pressed the Pair with Bridge button you can complete the pairing (within 30 seconds) by pressing the button on the Nuki Bridge.

Once pairing is complete the status on the page will show the API key and a Paired Status for your System and the Online Status will show ONLINE.

IP Details View
Pairing Progress View

Manually Pairing a Bridge

In the event that you cannot press the pair button or the discovery is not possible due to the lack of a server connection it is possible to manually add the IP and API details to the driver to pair the bridge manually.

We recommend using the automatic pairing above but this provides full flexibility to the installer.

Actions and Events

Normal Events
EventLocked Event fires when state is updated to locked / closed
EventUnlockedEvent fires when state is updated to Unlocked / Opened
Function ActionsNB: All Function Actions will trigger Normal Events above
ActionUnlock Unlock from an Action
ActionLock Lock from an Action
ActionLock and GoSee Nuki Documentation for more details
ActionUnlatchSee Nuki Documentation for more details
Action LatchSee Nuki Documentation for more details

PINLOCK – User Manual

Room Page Tile

The room page tile is the main entry point to the driver. Pressing on the tile will toggle the lock state. The lock will latch open unless auto-lock is enabled where it will lock after the preset auto-lock delay.

Home Page Tile Actions

The home page navigates you straight to the user interface of the driver.

Driver User Interface

  • Manual Control
    • Lock
    • Unlock ( this is still affected by auto-lock if enabled)
    • Activity Feed ( Shows information about recent actions)
  • Driver Settings
    • Launch Settings (password protected)

Driver Specific Settings

  • Auto Lock
    • Enable
    • Disable
    • Time (in seconds, min 10 – max 600)
  • Display on home page (tick box)
    • Enable
    • Disable
  • Licence
    • Launch Licence Settings

Common Settings

Display On Home Page

Licence Settings

Hardware Settings

Door and Lock – User Manual

This is a generic datasheet showing the common functionality of our UI Tiles that provide a Lock or Door function. All of the control functions are common to the whole range of these UI Tiles. This datasheet uses the Lock as an example of this functionality.

Find all Locks and Door Ui Tiles in the following category:
Door Access ->> Various 

Room Page Tile

The room page tile is the main entry point to the driver. Pressing on the tile will toggle the lock state. The lock will latch open unless auto-lock is enabled where it will lock after the preset auto-lock delay.

Home Page Tile Actions

The home page navigates you straight to the user interface of the driver.

Driver User Interface

  • Manual Control
    • Lock
    • Unlock (this is still affected by auto-lock if enabled)
    • Activity Feed (shows information about recent actions)
  • Driver Settings
    • Launch Settings (password protected)

Driver Specific Settings

  • Auto Lock
    • Enable
    • Disable
    • Time (in seconds, min 10 – max 600)
  • Open Close Delay
    • Time (in seconds, min 2 – max 10)
    • This defines how long the Lock or door takes to close and open.
  • Display on home page (tick box)
    • Enable
    • Disable
  • Licence
    • Launch Licence Settings

Actions and Events

These drivers feature a range of Actions and Events to allow you to connect up to hardware or other drivers.

The Events you need to use will be highly dependant on your required hardware setup.

SettingsParameterValueParameter 2ValueDescription
Auto CloseSwitchWhen the Auto Close feature is turned on the driver fires the Do Close Door event after the door has been open for the duration set in Auto Close Time
Auto Close TimeSecondsThe duration to leave the door open before sending the Do Close Door event if the Auto Close feature is turned on
Set Time For Open and Close FunctionSecondsUsually used with motorised gates and doors, this is the duration to show the door as opening or closing
Display on home pageCheckbox
Settings Password ControlCheckbox
ActionsParameterValueParameter 2ValueDescription
CloseTriggers the Do Close Door event and shows the door as closed
Close With DelayDelay (s)0 - 600 secondsWaits for the delay time then triggers the Do Close Door event and shows the door as closed
Disable Auto CloseTurns off the Auto Close feature
Door Closed SensorChanges the door state to Closed. If the previous door state was Door Opened (forced) then the Do Close Door event will also be triggered
Door Open SensorChanges the door state to Door Opened (forced) if the previous door state was closed
Enable Auto CloseTurns on the Auto Close feature
OpenTriggers the Do Open Door event and shows the door as open
Open Door With Auto RelockAuto Close Time (s)0 - 600 secondsTriggers the Do Open Door event and shows the door as open. Waits for the delay time then triggers the Do Close Door event and shows the door as closed. Note: This action is separate to the Auto Close Feature
Set Auto Close TimeAuto Close Time (s)0 - 600 secondsSets the duration to leave the door open before sending the Do Close Door event if the Auto Close feature is turned on
EventsParameterValueParameter 2ValueDescription
Do Close DoorThis event fires whenever the door is set to the closed state from the user interface, the close door actions or the auto close feature
Do Open DoorThis event fires whenever the door is set to the open state from the user interface or the open door actions
Close Button PressedThis event fires whenever the close button is pressed on the user interface
Open Button PressedThis event fires whenever the open button is pressed on the user interface
Tile Button PressedThis event fires whenever the room tile is pressed on the user interface
Normal Events
EventLocked / ClosedEvent fires when state is updated to locked / closed
EventUnlocked / OpenedEvent fires when state is updated to Unlocked / Opened
Button Presses
EventLock/Close Button PressedEvent triggered when any command button is pressed
e.g. Tile button, Lock Button , Open Button
( Use this event to trigger a momentary release)
EventUnLock/Open Button PressedUse to trigger a momentary release.
EventTile Button PressedSuggested use: Use to trigger a momentary release.
NB: The UITile State will toggle.
Control Sensor Actions
ActionControl Sensor OpenedIf Locked the this causes the UI to show a “forced open” message
ActionControl Sensor ClosedIf the previous state (before a forced open) was Locked then the
door sensor closing will cause the Lock state to be changed to locked
NB: A Locked / Closed Event will be triggered.
Function ActionsNB: All Function Actions will trigger Normal Events above
ActionUnlock / OpenUnlock / Close from an Action
ActionLock / CloseLock / Open from an Action
ActionUnlock / Open
with Auto Re-lock /Re-Close
This Action allows the installer to set a custom delay before relocking
/ reclosing
Configure Settings Actions
Action Disable Auto Lock / CloseDisable the Auto Lock / Close Feature
ActionEnable Auto Lock / CloseEnable the Auto Lock / Close Feature

Common Settings

Display On Home Page

Licence Settings

Select currency
GBP Pound sterling